Antennas & Power

Extended Range

The directional antennas focus wireless signals in a particular direction by creating a co-polarization pattern. Typically, you’ll be able to extend the reach of a radio by up to 2.5x in a particular direction.

Easy to Mount

The antenna comes with everything you need for a pole or wall mount, and is suitable for indoor or outdoor use. 2 cables with N-Type connectors are integrated with the antenna.

Improved Connectivity

Meraki’s antenna accessories improve the reach and connectivity of a Meraki network by focusing and increasing signal strengths between Meraki outdoor wireless access points.

Electrical

• Antenna type: panel
• Frequency range: 2.400 – 2.500 GHz
• Gain: 11 dBi
• Polarization: vertical / horizontal
• Half power bandwidth / horizontal: 80

Physical & Environmental

• Dimensions: 8.5" x 4.8" x 1.4" (215 mm x 122 mm x 35 mm)
• Weight: 0.26 lbs (120 g)
• Material: UV resistant plastic
• Temperature: -40 F to 176 F (-40 C to 80 C)
• Connector: 2 x N-type

Mounting

• Mounting hardware included
• Mounts to walls

Cables

• Cables with two N-type connectors included

Regulatory

• Certified for use with the MR62

Warranty

• 1 Year hardware warranty included

Extended Range

The directional antennas focus wireless signals in a particular direction by creating a co-polarization pattern. Typically, you’ll be able to extend the reach of a radio by up to 2.5x in a particular direction.

Easy to Mount

The antenna comes with everything you need for a pole or wall mount, and is suitable for indoor or outdoor use. 2 cables with N-Type connectors are integrated with the antenna.

Improved Connectivity

Meraki’s antenna accessories improve the reach and connectivity of a Meraki network by focusing and increasing signal strengths between MR66s and MR58s.

Electrical

• Antenna type: panel
• Frequency range: 5.150 – 5.850 GHz
• Gain: 14 dBi
• Polarization: vertical / horizontal
• Half power bandwidth / horizontal: 80

Physical & Environmental

• Dimensions: 8.5" x 4.8" x 1.4" (215 mm x 122 mm x 35 mm)
• Weight: 0.26 lbs (120 g)
• Material: UV resistant plastic
• Temperature: -40 F to 176 F (-40 C to 80 C)
• Connector: 2 x N-type

Mounting

• Mounting hardware included
• Mounts to walls, poles, or AP directly

Cables

• Cables with two N-type connectors included

Regulatory

• Certified for use with the MR66 and MR58

Warranty

• 1 Year hardware warranty included

Easy to Mount

The antenna comes with everything you need to attach it to your Meraki AP, and is suitable for indoor or outdoor use. No special adapters are needed.

Improved Connectivity

Meraki’s antenna accessories improve the reach and connectivity of a network by increasing signal strengths between repeaters and clients.

Electrical

• Antenna type: omni-directional
• Frequency range: (2 ghz): 2.400 - 2.500 ghz
• Frequency range: (5 ghz): 5.150 – 5.875 ghz
• Gain: 5 dbi
• Gain: 7 dbi
• Polarization: vertical (linear)
• Half power bandwidth / horizontal: 360°
• Half power bandwidth / vertical: 30°

Physical & Environmental

• Dimensions: 0.9" x 7.0" (22 mm x 178 mm)
• Weight: 0.15 lbs (70 g)
• Material: ABS plastic
• Temperature: -40° F to 131° F (-40° C to 55° C)
• Connector: N-type

Mounting

• Directly to unit (no cable required)

Box Contents

• Two Meraki ANT-10 antennas

Regulatory

• Certified for use with the MR62, MR66 and MR58

Warranty

• 1 Year hardware warranty included

Compatible With

• MR12
• MR16
• MR24

Physical Dimensions

• 2.7" x 2.6" x 1.2" (69 mm x 66 mm x 30 mm)
• Weight: 0.24 lb (110 g)

Input

• 100-240 V 50/60 Hz AC

Output

• 12V 1.5A DC

Warranty

• 1 Year hardware warranty included

Easy Installation

Use Power Over Ethernet to supply power (and optionally data) to Meraki 802.3af compatible devices. Ethernet cable is inexpensive and easy to install. Simply plug the AC adapter into the side of the Meraki PoE injector, then plug ethernet cable into the PoE port and route that cable to your 802.3af-compatible device. To add a wired data connection, plug the data ethernet cable into the LAN port on the Meraki PoE Injector.

Power

• Input Voltage: 100 to 240 VAC
• Input Current: 0.5A max. for 90 VAC, 0.35A max. for 240 VAC
• AC Input Frequency: 47-63 Hz
• Maximum Output Power: 19.6 W
• Powered device can be up to 100m away from power injector

Data

• Compatible with 10/100/1000 Mbit/s Ethernet, full duplex

Environmental

• Operating Temperature: (32 to 104°F (0 to 40°C)
• Storage Temperature: (-16 to 149°F (-30 to 65°C)
• Operating Humidity: 5 to 90%

Additional Features

• Over-voltage and over-current protection
• Short-circuit protection

Physical Dimensions

• 5.98” x 2.56” x 1.42” (152 mm x 65 mm x 36 mm)
• Weight: 1.0 lb (450 g)

Ordering Information

• POE-INJ-3-US Meraki 802.3af Power over Ethernet Injector (US plug)
• POE-INJ-3-EU Meraki 802.3af Power over Ethernet Injector (EU plug)
• POE-INJ-3-UK Meraki 802.3af Power over Ethernet Injector (UK plug)
• POE-INJ-3-AU Meraki 802.3af Power over Ethernet Injector (AU plug)

Mounting

• Mounts to walls (anchors and screws not included)

Compatibility

• Complies with 802.3af standard
• MR-Series Access Points

LED Indicators

• Input Power
• Fault
• Detect/connected to valid 802.3af load

Extended Range

The panel antenna focus wireless signals in a particular direction by creating a 60° cone of coverage. Typically, you’ll be able to extend the reach of a radio by up to 2.5x in a particular direction.

Easy to Mount

The antenna comes with everything you need for a pole or wall mount, and is suitable for indoor or outdoor use. A 3’ (1m) cable helps you place the antenna in the best position.

Improved Connectivity

Meraki’s antenna accessories improve the reach and connectivity of a network by increasing signal strengths between repeaters and clients.

Electrical

• Antenna type: panel
• Frequency range: 2.4 - 2.5 ghz
• Gain: 7.5 dbi
• Polarization: vertical (linear)
• Half power beam width / horizontal: 60°
• Half power beam width / vertical: 60°

Physical & Environmental

• Dimensions: 5.1” x 5.3” x 1.0” (130x135x26mm)
• Weight: 0.4 lbs (187g)
• Material: ABS plastic
• Temperature: -40°F to 176°F (-40°C to 80°C)
• Connector: RP-SMA
• Cable: 3’ (1m)

Mounting

• Pole
• Wall

Included Hardware

• Antenna and cable
• Pole mounting bracket
• Hose Clamps
• Wall mounting screws

Regulatory

• Certified for use with the Meraki OD2
• USA (FCC)
• EU (CE)

Warranty

• 1 Year hardware warranty included

Extended Range

Extend the range of a Meraki Outdoor by up to 2x, by focusing wireless signals towards clients and other Meraki radios at ground level.

Easy to Mount

The antenna comes with everything you need to attach it to your Meraki device, and is suitable for indoor or outdoor use. No special adapters are needed.

Improved Connectivity

Meraki’s antenna accessories improve the reach and connectivity of a network by increasing signal strengths between repeaters and clients.

Electrical

• Antenna type: omni-directional
• Frequency range: 2.4 - 2.5 GHz
• Gain: 7 dBi
• Polarization: vertical (linear)
• Half power beam width / horizontal: 360°
• Half power beam width / vertical: 20°

Physical & Environmental

• Dimensions: 0.56" x 10.6" x 0.56" (15 mm x 270 mm x 15 mm)
• Weight: 0.1 lbs (45g)
• Material: ABS plastic
• Temperature: 14° F to 131° F (-10° C to 55° C)
• Connector: RP-SMA

Mounting

• Directly to unit (no cable required)

Included Hardware

• Antenna only

Regulatory

• Certified for use with the Meraki OD2
• USA (FCC)
• EU (CE)

Warranty

• 1 Year hardware warranty included

Easy Installation

Use Power Over Ethernet to supply power (and optionally data) to Meraki devices. Ethernet cable is inexpensive and easy to install. Simply plug the Meraki AC Adapter into the side of the PoE injector, then plug ethernet cable into the PoE port and route that cable to your Meraki device. To add a wired data connection, plug the data ethernet cable into the LAN port on the Meraki PoE Injector.

Universal Compatibility

The Meraki PoE Injector works with most current and discontinued Meraki devices except for the MR11, MR14, MR58. A single injector model means less complexity when you order equipment and install Meraki networks.

Compatible with

• OD2

Requires

• Meraki AC Adapter

Dimensions

• 1.8" x 0.8" x 1.3" (46 mm x 20 mm x 33 mm)

Compliance

• Not compliant with the 802.3af PoE standard

Warranty

• 1 Year hardware warranty included

Easy Replacement

AC adapters occasionally get lost or are damaged and no longer function. Every Meraki device is shipped with a Meraki AC Adapter in the box - this AC adapter is a replacement unit. To keep your Meraki devices running, simply purchase the Meraki AC Adapter and plug it in to your device, or plug it in to the Meraki Power Over Ethernet (POE) Injector.

Compatible With

• OD2

Input

• 100-240 V 50/60 Hz AC

Output

• 15 V 0.8 A DC

Physical Dimensions

• 4.5" x 2.5" x 1.13" (63 mm x 114 mm x 29 mm)
• Weight: 0.22 lb (100 g)

Warranty

• 1 Year hardware warranty included