Power your Meraki 802.3af Compatible Devices
The Meraki PoE Injector allows delivery of both data and power to a Meraki access point over a single Ethernet cable, allowing deployment of devices exactly where they are needed to provide the best wireless coverage and at much lower installation cost.
This POE injector is specifically designed to meet the power needs of Meraki 802.3af-compatible devices. Check the access point specifications to ensure compatibility.
$99
Features & Benefits
Easy Installation
Use Power Over Ethernet to supply power (and optionally data) to Meraki 802.3af compatible devices. Ethernet cable is inexpensive and easy to install. Simply plug the AC adapter into the side of the Meraki POE injector, then plug ethernet cable into the POE port and route that cable to your 802.3af-compatible device. To add a wired data connection, plug the data ethernet cable into the LAN port on the Meraki POE Injector. |
Technical Specifications |
Power
- Input Voltage: 100 to 240 VAC
- Input Current: 0.5A max. for 90 VAC, 0.35A max. for 240 VAC
- AC Input Frequency: 47-63 Hz
- Maximum Output Power: 19.6 W
- Powered device can be up to 100m away from power injector
Data
- Compatible with 10/100/1000 mbit/s Ethernet, full duplex
Environmental
- Operating Temperature: (32 to 104°F (0 to 40°C)
- Storage Temperature: (-16 to 149°F (-30 to 65°C)
- Operating Humidity: 5 to 90%
Additional Features
- Over-voltage and over-current protection
- Short-circuit protection
Physical Dimensions
- 5.98” x 2.56” x 1.42” (152 mm x 65 mm x 36 mm)
- Weight: 1.0 lb (450 g)
|
|
Mounting
- Mounts to walls (anchors and screws not included)
Compatibility
- Complies with 802.3af standard
- MR11
- MR14
- MR58
LED Indicators
- Input Power
- Fault
- Detected/connected to valid 802.3af load
Regulatory
- USA: FCC Part 15 Class B
- EU: EN55022 Class B
Warranty
- 1 year hardware warranty included
|
Ordering Information
- POE-INJ-3-US Meraki 802.3af Power over Ethernet Injector (US plug)
- POE-INJ-3-EU Meraki 802.3af Power over Ethernet Injector (EU plug)
- POE-INJ-3-UK Meraki 802.3af Power over Ethernet Injector (UK plug)
- POE-INJ-3-AU Meraki 802.3af Power over Ethernet Injector (AU plug)
|
